Copper Lugs and LinksDouble Grip Lugs
Double Grip Lugs

Double Grip Lugs are designed for critical or high vibration type applications. The flared barrel of the lug is crimped on to the insulation of the cable and acts as a support for the insulation. The end result is a superior mechanical and electrical connection.

Standard hexagonal compression dies are used for the conductor crimp, and as an indication use a compression die that is two sizes larger for the insulation crimp. Insulation thicknesses do tend to vary, between manufacturers’ so this needs to be verified by the installer.

Click here to view technical drawing of the Double Grip Lugs >

Part No.Cable SizeStud Size (mm)Approx Die Size On Flare (mm)Dimensions (mm) ADimensions (mm) BDimensions (mm) DA/F Hex Die (mm)Add to wishlist
ECL35-8DG35mm811.56124249.2
ECL35-10DG35mm1011.56124249.2
ECL50-10DG50mm1014.264242410.4
ECL50-12DG50mm1214.264242410.4
ECL70-10DG70mm1016.566242411.5
ECL70-12DG70mm1216.566242411.5
ECL95-10DG95mm1018.378262614.2
ECL95-12DG95mm1218.378262614.2
ECL120-10DG120mm102084262616.5
ECL120-12DG120mm122084262616.5
ECL150-10DG150mm1023.198323218.3
ECL150-12DG150mm1223.198323218.3
ECL185B-DG185mmblank26107323220
ECL240B-DG240mmblank28.1112424223.1
ECL300B-DG300mmblank31130464626
Another slightly different website